Residential EV Charger Installation

EV charger installation in the Yarra Valley and South East Melbourne, by a licensed and insured local electrician. JPG Tech fits hardwired home chargers on houses in Lilydale, Monbulk and the Dandenongs as readily as in Bentleigh or Rowville, including rural and acreage properties where the driveway is long, the supply is limited or solar is already on the roof.

EV charging cable plugged into the charge port of a Tesla
CarmEli Catering
Google Star Icons

I needed a cabler quite urgently, Jake agreed to show up at very short notice, he was extremely professional, fairly priced, and the communication was great!

Lachlan M.
Google Star Icons

Jake recently installed new Downlights and fans, and upgraded switches and outlets in our home. His service was timely and professional and the results are exceptional! He has completely transformed our home and I strongly recommend you call JPG Tech for your electrical needs.

Luke Van Winsen
Google Star Icons

Jake did an exceptional job with new lighting and power for my home renovations. He was upfront, honest, punctual and competitive on pricing. Highly recommend for all your electrical needs.

Emily GC
Google Star Icons

Jake from JPG Tech is an absolute standout. Professional, knowledgeable, and genuinely committed to getting things done right. He took the time to walk me through everything, answered every question, and made the whole process incredibly smooth.

Kate Martin
Google Star Icons

Jake has been upgrading our house over the years, great service and great job :)

Annie Fenby
Google Star Icons

Highest of recommendations for Jake and his work. Punctual, Professional and Polite, what more could you ask? Thanks Jake for the work you have done to help us restore hit water to our home. We will definitely have more work for you soon!!

Warren Somers
Google Star Icons

Jake's attention to detail was well above others. His execution of the various jobs I had around the house were completed to a very high standard. The workspaces were left cleaner than when he arrived. Ripper job and highly recommend.

Dan Dealy-Hewitt
Google Star Icons

Jake replaced all 50 of our light fittings and 8 ceiling fans and did a fantastic job. He made some good recommendations when he came to quote, was very reasonably priced, quick and tidy! We'll use JPG again for our next job!

Read All Reviews

Fast, Safe & Smart
Home Charging

Expert Assessment & Customised Solutions

Before installation, our licensed electricians conduct a detailed home electrical assessment — evaluating your capacitywiring integrity

Code-Compliant Professional Installation

All installations follow AS/NZS 3000 wiring rules and charger-specific certifications. We handle load calculations and weatherproofing, ensuring no fire risks or voided warranties.

Ongoing Support & Future-Proofing

Our commitment extends beyond installation. We offer post-installation support, routine maintenance and the option to integrate your EV charger with smart home systems or solar panels.

A residential switchboard installed professionally by JPG Tech
Before & after images of a switchboard upgrade for EV charger installation

Our EV Charger Installation Process

  1. Electrical Assessment: We start with a detailed review of your existing wiring and switchboard. This assessment confirms whether your home is ready for a dedicated 240V circuit and advises if any switchboard upgrades are required.
  2. Charger Consultation: If you need advice, we can help you choose or recommend the right EV charger based on your vehicle’s requirements and daily driving habits.
  3. Professional Installation: We install your chosen charger in accordance with local standards. We complete all the wiring, mounting and final testing with minimal disruption to your home.
An EV charger installed in a residential property by JPG Tech
EV Charger installed by JPG Tech near Olinda

Charger Selection & Consultation

We help you choose between Level 1, Level 2 and smart chargers. With an understanding of your driving habits and energy usage, we guide you to a solution that maximises convenience while lowering your running costs.

Level 1 Charging

Uses a standard 240V outlet for low-power, overnight trickle charging.

Level 2 Charging

Requires a dedicated 15-32 amp hard wired circuit for fast, overnight charging.

Smart Chargers

With remote scheduling and energy management features to help you save on power costs.

JPG Tech's ute on site after installing a permanent generator for a commercial property.

Maintenance & After-Service Support

We provide you with thorough instructions, including advice on routine maintenance and any future upgrade options. Our work is fully insured so you can have peace of mind.

Say goodbye to
poor installation
unsafe wiring
unqualified service
outdated tech
no affter-service support
mismatch systems
permit hassles

Frequently Asked Questions

How much does an EV charger installation cost?

The cost of installing an EV charger typically ranges from $500 to $1,000, depending on factors such as the type of charger, electrical setup, switchboard capacity, and any additional wiring or upgrades required.

Will I need a 3-phase upgrade? Most electricians try to upsell me.

Only if your EV supports 22kW AC charging (most don’t). We’ll verify your vehicle’s onboard charger specs first – 90% of homes work with existing single-phase.

Do I need to upgrade my switchboard?

Sometimes your existing switchboard may not have the capacity for a dedicated 240V circuit. We perform a full assessment and, if necessary, advise on or complete a switchboard upgrade to ensure safety and efficiency.

My strata says no to wall drilling. Any options?

Yes! We install non-invasive cable channels (AS 2053 compliant) and use load-sharing tech to avoid main switchboard upgrades – approved in 94% of strata rejections.

What hidden issues should I know about EV charger installations?

Many EV owners are unaware that inadequate wiring, switchboard overload, or non-compliant permits can lead to safety hazards and expensive repairs. We tackle these issues head on by providing a thorough assessment, ensuring safe, code-compliant installations with no surprise costs.

Inquire for EV Charger Installation

  1. A clear photo of your switchboard/s (with the cover open, if possible)
  2. A wide photo showing the switchboard and the wall it’s mounted on (Include from the floor/ground to the ceiling/roof)
  3. Several photos showing different angles of your house exterior
  4. A photo of the proposed charger installation location
Thank you for requesting an on-site quote with JPG Tech. We will reach out shortly to schedule our visit.
Oops! Something went wrong while submitting the form.
Please reach out to us directly at hello@artmade.com.au